DJB

Coal Fired Converted Accucraft Edrig

Coal fired converted Accucraft Edrig

Orders now being taken subject to Edrig availability.

We are offering a limited conversion service which includes the following:-

  • New coal fired multi tube boiler with, Regulator, Safety valve, Water Gauge and Pump feed Clack Valve, with provision for fitting a Resonator Whistle, uses the Pressure gauge off the original engine.
  • Crosshead driven pump with by-pass valve and Quick fill connector.
  • Stainless grate and Ashpan.
  • Original Lubricator is used.
  • All pipework to connect :- Lubricator, Blower and Main Steam Pipe.
  • Uses original Edrig smokebox and Chimney. We may offer our Cast Smokebox with opening Door as alternative.
  • Boiler Cladding Sheet in brass.
  • Etched inner side tanks to hold water for the pump with balance pipe.
  • Etched dummy sliding bunker doors.
  • All fixings.
  • All new parts fully painted.
  • Fully tested conversion.

Edrig coal firing conversion

You can either send us your Edrig for conversion or we will buy the Edrig and convert for you.

Cost for RTR conversion:
£1,590, customer supplies Edrig.

Edrig coal firing conversion